G15K Silicone LED Light Therapy Mask Manufacturer
- Enhanced collagen production capability significantly reduces fine lines, wrinkles and redness, for younger-looking skin.
- Upgraded light coverage provides our famous instant glow,for a healthier, brighter and smoother complexion.
- Performance
66 LEDs (98% coverage) + 4 extra 1072nm laser beads for maximum efficiency. - User-Friendly
Simple 3-button controller for time and intensity adjustment. - Comfort & Portability
Flexible silicone fits any face perfectly-rechargeable and ready for use athome oron the go.
Technical specifications
|
No.
|
Title
|
Product Parameters
|
|---|---|---|
|
1 |
Product Model |
HY-G15K |
|
2 |
Control Method |
Direct connection between wired controller and LED mask |
|
3 |
Working Mode |
Fixed mode: 633nm + 850nm + 1072nm three-band irradiation |
|
4 |
Working Status |
Adjustable working time: 5-10-15 minutes (3 levels); |
|
5 |
LED Specifications |
5050 |
|
6 |
Number of LEDs |
Total 66 LEDs: 62 pcs 633+850+850nm, 4 pcs 633+1072+850nm |
|
7 |
LED Wavelengths |
633 nm (Red) · 850 nm (NIR) · 1072 nm (Deep NIR) |
|
8 |
Peak Wavelength Tolerance |
633nm/850nm: ±5 nm; 1072nm: ±10 nm (per LED @25°C) |
|
9 |
Irradiance (0 cm) |
20 ±5 mW/cm² |
|
10 |
Usage Times (per charge) |
7 cycles |
|
11 |
LED Screen |
Same as G10 screen |
|
12 |
Rated Power |
8W |
|
13 |
Battery Capacity |
2000mAh 804050 3.7V Li-polymer battery |
|
14 |
Charging Port |
Type-C |
|
15 |
Charging Current |
0.5C |
|
16 |
Charging Protection |
Overcharge, over‑discharge, overcurrent and short circuit protection |
|
17 |
Charging Time |
< 4.5 h |
|
18 |
Charging Operation |
Cannot operate while charging / connected to power |
|
19 |
Product Protection Level |
IP20 |
|
20 |
Certifications |
GB4706.15‑2008 / GB4706.1‑2005 / FCC / CE / FDA |
|
21 |
Strap |
White, neoprene + SBR, Velcro adhesion life ≥1000 cycles |
|
22 |
Shielded Cable |
5‑core Type‑C flat cable, length 1.2 m, tinned ends |
|
23 |
Packaging Marking |
Lithium‑ion battery warning label and recycling symbol |
|
24 |
Packing List |
Mask / Controller / USB‑A to C charging cable / Left & right straps / Storage bag / |
Proven to reduce the visible signs of ageing
236 LEDs emit the 3 most clinically recognised wavelengths for anti-ageing, penetrating up to 10mm into the skin:
– Red light (633nm): Boosts collagen production, reducing fine lines and wrinkles
– Near-infrared (850nm): Energises cells to firm, tighten and brighten skin
– Deep near-infrared (1072nm): Targets areas where signs of ageing are more pronounced, boosting collagen production deep under the skin.
See less lines and wrinkles and firmer, brighter and smoother skin in just 8 weeks. Sessions are completely painless and take just 10 minutes.
Understand the upgrades
Brand new appearance, lightweight and slim;
Excellent lens effect of lamp beads, smooth and delicate to the touch, without affecting irradiance;
Stylish and sophisticated, featuring a flat silicone mask that supports customized surface patterns and colors;
Extremely cost-effective, with 66 LED beads arranged in a strategically optimized matrix, covering 98% of the area for shadow-free irradiation;
Easy to operate, equipped with a three-button controller: the power button allows one-click switching between working states, the time button enables precise adjustment of treatment duration, and the brightness button adjusts the irradiation intensity as needed;
Comes with 4 high-cost-performance 1072nm laser beads;
Ideal for home use and travel.
How To Use
Preparation before use
Charging:
Insert the Charging cable into the controller. The charging port which can be found in the top of the controller is tight to ensure it is waterproof,
therefore it may require a stronger push than anticipated.
Plug the opposite end of the Charging cable into your outlet adapter computer, or any other USB charging port available as shown in the figure.
Note: Charging time
When charging, the Batter level symbol ( ) will flash. When the symbol changes from to and does not flash, it means the controller is
fully charge. It takes 2.5-3 hours to fully charge.
The battery service life of the LED Light Therapy Mask is dependent on frequency and duration of use. If you use the LED Light Therapy Mask every
day , we suggest charging every 1-2 weeks.
The LED Light Therapy Mask do not include the power adapters. Please use an IEC 606061-1 compliant power adapter with AC 100-240V 50-60Hz
input, DC 5V 2A output.
Caution: Do not use the device while charging
Light Sensitivity Test
1) Turn on the LED Light Therapy Mask and select LED energy level 1. 2) Place the device on the arm and preliminary test for a total time of about 10minutes.
3) The treatment will not create any sensation on your skin. If you do not feel comfortable, or if you see adverse effects such as severe redness,
please stop the test immediately.
4) Wait 48 hours and examine the tested area. 5) If the skin in the tested area seems normal (no adverse effects) you can proceed with a full treatment in the highest comfortable energy level
you tested.
You might also like
OUR CERTIFICATE
Our products are certified by FDA 510K, CE, FCC, MDSAP, RoHS, and TGA, meeting global safety and quality standards. We are committed to providing high-quality red light therapy and beauty devices, ensuring safety, reliability, and compliance for professionals and distributors worldwide.
Frequently Asked Questions
Q：Can I share my LED Light Therapy Mask
A：No, We recommend LED Facial Therapy Mask for single use , not for multiple use in order to avoid cross infection.
Q：How does it work?
A：The Pureluxtech devices use optimized energy output and two clinically proven wavelengths of light (red and near-infrared) to work at a cellular level to stimulate new collagen and reduce fine lines, wrinkles, and other visible signs of aging.
The red wavelength (633nm) supports natural cellular repair and renewal for a visibly refreshed, more radiant complexion.
The near-infrared wavelength (830nm) targets deeper fibroblast cells, stimulating new collagen and elastin production for plumper, firmer, more youthful-looking skin.
Q：How long does it take LED light therapy to work?
A：With consistent use, you should start to see results from your Pureluxtech device starting at 4 weeks. Be sure to take before and after pictures to compare your progress. Sometimes it can be hard to notice a difference until you compare your before and after photos.
Q: Does LED Light Therapy interfere with medications?
A: Red and near-infrared light wavelengths are widely studied and commonly used in cosmetic LED light therapy. However, if you are taking photosensitising medications or have any concerns, we recommend consulting a qualified healthcare professional before using this device.
Q：How many times will the device?
A: Your mask is built to last if you follow the usage and care instructions. Do not use your mask for more than 10 minutes per session and always
wait at least 8 hours between treatments.
Q：What does the energy level selection button do?
A：The energy level selection button will adjust the light intensity. is the lowest intensity and is the highest intensity.
Q： Is the LED Light Therapy Mask safe?
A：Yes. It is safe and completely non-invasive. It has been used for years in numerous medical treatments, medical spas, and by estheticians and
dermatologists around the world.
Q：Does the LED Light Therapy Mask cause any pain?
A： No, LED treatments are not painful and the light does not cause any pain at all. LED light has a soothing and calming effect.
Have Any Questions?
Fill out the form below to connect with our expert team. We’re here to support your business with professional red light therapy solutions and tailored product development.